Cycling and bicycle racing discussion forums.   View New Forum Topics
Today's Forum Topics

Set as homepage


Go Back   Cycling Forums > Tech Corner > Cycling Equipment
User Name
Password
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


Welcome to CyclingForums.com

You are currently viewing our website as a guest which gives you limited access to view most discussions. You will have to register before you can post to this thread.

By joining our free online community you will have access to post new topics, communicate privately with other cyclingforums.com members (PM), respond to polls, upload photos and access other special features like product reviews and classifieds.


Technical Expert Help Needed!

Reply
 
Thread Tools Search this Thread Display Modes
Old 16-04.-2008, 11:17 PM   #1
mseanschmidt
Registered User
 
Join Date: Aug 2006
Posts: 27
Default Technical Expert Help Needed!

I've had an ongoing vibration/resonance problem for almost a year now on my Seven ID8 with full Campy Record components. The vibration occurs ONLY in the big front ring, on a flat road and at a steady consistent cadence. There needs to be some torque on the chain but not an all out hammer. I get a vibrating/resonance coming up through the cranks. Outside of that unique situation, the bike is smooth as butter, which makes it frustrating. The LBS has changed out every component- pedals, tires, wheels, crank, chain, derailleurs and cassette. The bike went back to Seven for 3 weeks and they sent it back saying it was the most aligned bike ever to come out of the factory. I found a thread on Campy Only describing my exact problem... they fixed it by changing from dry lube to wet lube and torquing the rear cassette to Campy specs. I did both and it did not solve the problem. The only "variable" at this point I can use for diagnostic is that Campy sent us a rear record derailleur that was set at the factory at the tightest setting. This actually changed when I feel the resonance. With the old record rear derailleur I would feel it at a higher steady cadence like 90 rpm. With the newly set derailleur there is NO resonance (butter smooth) at a higher 90 rpm cadence but when I slow down to a steady 55-60 rpm cadence the resonance starts.

I'm at wits end on this!!! Could any experts out there offer any suggestions at all???
mseanschmidt is offline  
Reply With Quote
Old 16-04.-2008, 11:23 PM   #2
Peter@vecchios
Registered User
 
Join Date: Dec 2007
Posts: 603
Default Re: Technical Expert Help Needed!

Quote:
Originally Posted by mseanschmidt
I've had an ongoing vibration/resonance problem for almost a year now on my Seven ID8 with full Campy Record components. The vibration occurs ONLY in the big front ring, on a flat road and at a steady consistent cadence. There needs to be some torque on the chain but not an all out hammer. I get a vibrating/resonance coming up through the cranks. Outside of that unique situation, the bike is smooth as butter, which makes it frustrating. The LBS has changed out every component- pedals, tires, wheels, crank, chain, derailleurs and cassette. The bike went back to Seven for 3 weeks and they sent it back saying it was the most aligned bike ever to come out of the factory. I found a thread on Campy Only describing my exact problem... they fixed it by changing from dry lube to wet lube and torquing the rear cassette to Campy specs. I did both and it did not solve the problem. The only "variable" at this point I can use for diagnostic is that Campy sent us a rear record derailleur that was set at the factory at the tightest setting. This actually changed when I feel the resonance. With the old record rear derailleur I would feel it at a higher steady cadence like 90 rpm. With the newly set derailleur there is NO resonance (butter smooth) at a higher 90 rpm cadence but when I slow down to a steady 55-60 rpm cadence the resonance starts.

I'm at wits end on this!!! Could any experts out there offer any suggestions at all???


Not uncommon to see/feel this on many drivetrains. It is the chain 'vibrating' back and forth as it leaves the cogset on the way to the chainring. I would suggest perhaps stiffer chain, which is probably Campag, compared to shimano and Sram. If you have a Campagnolo chain, well..it is not uncommon tho.
Peter@vecchios is online now  
Reply With Quote
Old 17-04.-2008, 01:27 AM   #3
benkoostra
Registered User
 
benkoostra's Avatar
 
Join Date: Mar 2006
Location: Ballard, WA
Posts: 342
Default Re: Technical Expert Help Needed!

I think Peter is on to something, only I would look at the vertical motion of the chain as it leaves the cogs and head for the chainring.

It has to be the chain IMO.

Can you get it to happen on a stand or a trainer? If you can, get it going and have someone touch the chain with a stick (or whatever) above or below the chainstay and see if that stops it.
benkoostra is offline  
Reply With Quote
Old 17-04.-2008, 06:33 AM   #4
alfeng
Registered User
 
Join Date: Jul 2005
Posts: 1,914
Default Re: Technical Expert Help Needed!

It might not be a factor, but you did not mention the size of the frame -- 60+ cm?

While I presume it is a Ti frame, is it?
alfeng is offline  
Reply With Quote

Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT +10. The time now is 11:31 PM.


Powered by: vBulletin Copyright © 2000 - 2008, Jelsoft Enterprises Ltd.
Copyright © 2001 - 2006 cyclingforums.com

Links to websites we like:
Pezcyclingnews | Cyclingnews.com | Wine Zone | iinet