Cycling and bicycle racing discussion forums.   View New Forum Topics
Today's Forum Topics

Set as homepage


Go Back   Cycling Forums > General > The Bike Café > aus.bicycle > aus.bicycle archive
User Name
Password
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


Welcome to CyclingForums.com

You are currently viewing our website as a guest which gives you limited access to view most discussions. You will have to register before you can post to this thread.

By joining our free online community you will have access to post new topics, communicate privately with other cyclingforums.com members (PM), respond to polls, upload photos and access other special features like product reviews and classifieds.


Changing chains

 
 
Thread Tools Search this Thread Display Modes
Old 12-04.-2003, 05:09 AM   #1
Paul J
Registered User
 
Join Date: Apr 2003
Location: QLD, Aust
Posts: 119
Question Changing chains

Is it necessary to renew cassette and chainrings when replacing an old chain.
I've been told this by one shop guy while another guy says different.
Paul J is offline  
Old 12-04.-2003, 08:00 AM   #2
John Stevenson
Guest
 
Posts: n/a
Default Re: Changing chains

Paul J wrote:
> Is it necessary to renew cassette and chainrings when replacing an old chain. I've been told this
> by one shop guy while another guy says different.

It depends. If your old chain is very worn (more than 1/8in elongation for 12in for chain) then it
will almost certainly have worn the sprockets and chainrings to the point that a new chain won't
mesh with them properly and will slip.

However, if the chain wear is less than this, 1/16in or so, then you may get away with just
replacing the chain.

--
John Stevenson Cyclingnews.com
 
Old 12-04.-2003, 02:00 PM   #3
Jeff Jones
Guest
 
Posts: n/a
Default Re: Changing chains

"Paul J" <usenet-forum@cyclingforums.com> wrote in message news:3e9725cb$1_3@news.chariot.net.au...
> Is it necessary to renew cassette and chainrings when replacing an old chain. I've been told this
> by one shop guy while another guy says different.

For most normal people yes it's necessary to change both. Change just the chain and you'll quickly
realise why. I've come to the conclusion that unless you've got a really expensive and hard wearing
cluster, you may as well change them both at the same time and thus get more wear out of the chain.

e.g. my chain cost 28 euros and my cluster cost 51 for a grand total of 79 euros. I got around
15,000 km out of them. Had I changed the chain every 5,000 km, maybe I could have
optimistically gotten 30,000 km out of the cluster.

6 x 28 + 51 = 218 euros = more expensive.

or even every 10,000 km - doubtful whether I'd get 30,000 km out of the cluster though.

3 x 28 + 51 = 135 euros = cheaper.

or the lazy way:

2 x 79 = 158 euros. Less resource intensive.

To save even more euros, I could clean the chain a bit more. Don't like to do that unless I can
avoid it i.e. it rains/hails/snows.

cheers, Jeff
 
Old 12-04.-2003, 04:56 PM   #4
Paul J
Registered User
 
Join Date: Apr 2003
Location: QLD, Aust
Posts: 119
Default Re: Changing chains

Thanks guys.
I'm wondering whether I really need to change the chain at all. Got a new chain at about 2000km with a major service. Done another 4000km since then and recently had another major service but the chain just seemed to be slipping a bit this morning each time I changed down.
Paul J is offline  
Old 12-04.-2003, 07:00 PM   #5
Blind Freddy
Guest
 
Posts: n/a
Default Re: Changing chains

"Jeff Jones" <jeff@cyclingnews.com> wrote in message
news:3e974406$0$12929$ba620e4c@reader1.news.skynet.be...
|
| "Paul J" <usenet-forum@cyclingforums.com> wrote in message
| news:3e9725cb$1_3@news.chariot.net.au...
| > Is it necessary to renew cassette and chainrings when replacing an old chain. I've been told
| > this by one shop guy while another guy says different.
|
| For most normal people yes it's necessary to change both. Change just the chain and you'll quickly
| realise why. I've come to the conclusion that unless you've got a really expensive and hard
| wearing cluster, you may as well change them both at the same time and thus get more wear out of
| the chain.
|
| e.g. my chain cost 28 euros and my cluster cost 51 for a grand total of 79 euros. I got around
| 15,000 km out of them. Had I changed the chain every 5,000 km, maybe I could have
| optimistically gotten 30,000 km out of the cluster.
|
| 6 x 28 + 51 = 218 euros = more expensive.
|
| or even every 10,000 km - doubtful whether I'd get 30,000 km out of the cluster though.
|
| 3 x 28 + 51 = 135 euros = cheaper.
|
| or the lazy way:
|
| 2 x 79 = 158 euros. Less resource intensive.
|
| To save even more euros, I could clean the chain a bit more. Don't like to do that unless I can
| avoid it i.e. it rains/hails/snows.
|
| cheers, Jeff

Isn't a Euro a small kangaroo? That's a lot of kangaroos for a chain.

Marty
 
Old 13-04.-2003, 12:30 AM   #6
Hugh Fenton
Guest
 
Posts: n/a
Default Re: Changing chains

My theory is that the chain wears a bit faster than the cluster/rings. So I run 2 chains, swapping
every 2000k or so. When both chains are dead, replace the whole shebang Hugh

"Paul J" <usenet-forum@cyclingforums.com> wrote in message news:3e9725cb$1_3@news.chariot.net.au...
> Is it necessary to renew cassette and chainrings when replacing an old chain. I've been told this
> by one shop guy while another guy says different.
>
>
>
> --
> >--------------------------<
> Posted via cyclingforums.com http://www.cyclingforums.com
 
Old 13-04.-2003, 03:30 AM   #7
Jeff Jones
Guest
 
Posts: n/a
Default Re: Changing chains

"Blind Freddy" <mart@geo.net.au(spam)> wrote in message news:ZCQla.1$7n.2735@vicpull1.telstra.net...
>
>
> Isn't a Euro a small kangaroo? That's a lot of kangaroos for a chain.
>
I know. That's the bloody EC for you. In the good old days it was only 1120 Belgian francs, and you
could carry them around in your wallet without it jumping around.

Jeff (a long way from the rabbit-proof fence at the momentje)
 
Old 13-04.-2003, 10:00 PM   #8
Stu
Guest
 
Posts: n/a
Default Re: Changing chains

http://www.sheldonbrown.com/chains.html have a read of this if it is only slipping when you are
changing gears l am not sure that a new chain will fix it what sort of riding do you do? 4000kms
doesn't sound like allot if it has been looked after
 
Old 14-04.-2003, 01:00 AM   #9
Richard
Guest
 
Posts: n/a
Default Re: Changing chains

I've been using a Rohloff-Caliber gauge (made in Germany) for nearly 10 years to gauge the chain
wear and replace it on the basis of measurable wear. My chain rings and sprocketts now last years
with no skipping or disfunction occuring, but change out chains much more frequently than I used to
(2-3 months sometimes). I've learnt the chain life is more affected by enviroment than actual miles
with dust, grit and water the killers. It takes 5 sec's to test the chain.

I bought the gauge in UK. I don't know who sells it in Australia.

"Paul J" <usenet-forum@cyclingforums.com> wrote in message news:3e9725cb$1_3@news.chariot.net.au...
> Is it necessary to renew cassette and chainrings when replacing an old chain. I've been told this
> by one shop guy while another guy says different.
>
>
>
> --
> >--------------------------<
> Posted via cyclingforums.com http://www.cyclingforums.com
 
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump



All times are GMT +10. The time now is 06:11 PM.


Powered by: vBulletin Copyright © 2000 - 2008, Jelsoft Enterprises Ltd.
Copyright © 2001 - 2006 cyclingforums.com

Links to websites we like:
Pezcyclingnews | Cyclingnews.com | Wine Zone | iinet