Today's Forum Topics
Set as homepage
|
View
New Forum Topics Today's Forum Topics Set as homepage |
 |
|
|||||||
Welcome to CyclingForums.com You are currently viewing our website as a guest which gives you limited access to view most discussions. You will have to register before you can post to this thread. By joining our free online community you will have access to post new topics, communicate privately with other cyclingforums.com members (PM), respond to polls, upload photos and access other special features like product reviews and classifieds. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
08-04.-2003, 02:28 PM
|
#1 |
|
Junior Member
Join Date: Apr 2003
Location: Tennessee Technological University
Posts: 16
|
cleaning your bike
I've finally got a real bike, a Trek 1000, I know it's not the best thing from Trek but its mine and much better than the cheap little Huffy that I had fixed up and actually went on a metric century on. But being as my Trek 1000 is the most bueatiful thing I own I want to keep it in the best shape possible. What are the best things to use to clean an Aluminum frame? I'm a poor college student so what are some cheap things to use as cleaners?
|
|
|
|
08-04.-2003, 02:45 PM
|
#2 |
|
Junior Member
Join Date: Feb 2003
Location: Melbourne, Australia
Posts: 27
|
One Aussie magazine said for the drive train - get a soft bristled paint brush (for painting walls, not canvases!) and brush with turps. The brush gets the turps nicely into the grooves. Spray the loosened gunk off with a hose, and wipe down with a clean rag. Don't spray into parts that will get water-logged!
For the rest, just use a rag/cloth, and some warm soapy water and mild detergent such as dishwashing detergent in a bucket. You might want to take the wheels off one at a time to do the brakes and to get into nooks and crannies. I've used the turps plenty of times over the last six months - no long term problems. It's quick and easy, and gets the grease off easier than citrus degreaser. I haven't heard of any reason not to. Anyone got any objections to turps? Cheers Ben |
|
|
|
|
08-04.-2003, 04:14 PM
|
#3 |
|
Senior Member
Join Date: Jan 2002
Location: Vanderbijlpark, South Africa
Posts: 204
|
Did my bikes last night. This is the routine (it does take some time):
1. Clean the drivetrain (chain, der., cluster, et al.) with engine degreaser. This is a dirty job, try to do it outside. I don't use turps as it has a slight oil base. 2. Take a strong detergent (I use Cleen Green) and spray it on the drivetrain that you have just cleaned. 3. Now spray the bike off with a hose, including the drivetrain (NOT high pressure). I don't spray my saddle, etc. 4. Wash the bike. I use the same stuff as I wash my car with, it protects the paint. 5. Rinse the bike. 6. Now leave the bike for about 20 minutes (not in the sun, you might loose some tubes  )7. Dry of the bike that is still wet. Now take furniture polish (the type in the spray can), spray it on the frame and polish. Reason for using this is that the polish "repells" dust on the frame and the bike smells nice. DON'T spray on the rims, you'll see your @ss! 8. Now I take my lube and lube all the parts that have bearings (i.e. wheels, cranks, etc.) but not on the chain/cluster. (I use Q20). 9. Lube the chain, I use White Lightning wax. If you're a student, spend the money, it's worth every cent. Follow the instructions on the bottle closely. Yes, it takes time, but it's worth EVERY minute. O and then get on your bike and go for a ride, you'll get MANY looks and even more compliments! 
__________________
Biking or NOTHING! |
|
|
|
Linear Mode
