Cycling Forums   View New Forum Topics
Today's Forum Topics

Set as homepage

Go Back   Cycling Forums > General > The Bike Café > rec.bicycles.misc
User Name
Password
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


Welcome to CyclingForums.com

You are currently viewing our website as a guest which gives you limited access to view most discussions. You will have to register before you can post to this thread.

By joining our free online community you will have access to post new topics, communicate privately with other cyclingforums.com members (PM), respond to polls, upload photos and access other special features like product reviews and classifieds.


Technical seat position question

 
Thread Tools Search this Thread Display Modes
Old 10-05.-2004, 10:36 AM   #1
curt
Guest
 
Posts: n/a
Default Technical seat position question

I have been dialing in my bicycle over the past weeks and feel I have found
a nice position, but I find that I am wanting to move back on my saddle a
little more. I moved it back on the rails as far as I can, but feel I would
like to move it back a little further, but have run out of rail. I was also
having a little knee problem and now that I moved my seat back it is gone,
but I am riding on the back of my seat a little too far.

Is there a negative in getting a new seat post that has the capability of
moving back further?

Thanks,
Curt


  Reply With Quote
Old 10-05.-2004, 11:06 AM   #2
Erik Freitag
Guest
 
Posts: n/a
Default Re: Technical seat position question

On Mon, 10 May 2004 02:36:08 +0000, curt wrote:

> Is there a negative in getting a new seat post that has the capability of
> moving back further?


I don't know if there's a negative to a new seatpost, but I was wondering
if what you really need is a longer stem.

  Reply With Quote
Old 10-05.-2004, 11:09 AM   #3
R15757
Guest
 
Posts: n/a
Default Re: Technical seat position question

Curt asked in part:

<< Is there a negative in getting a new seat post that has the capability of
moving back further? >>

Curt, it is possible that your seat is still a bit too low. If this is true,
you could raise it up to the proper level and suddenly lose the impulse to move
back.

Robert

  Reply With Quote
Old 10-05.-2004, 11:51 AM   #4
curt
Guest
 
Posts: n/a
Default Re: Technical seat position question

I think the stem is okay. I guess I should have clarified this a bit
better. The main reason that I want to move back is because of knee
discomfort. Now that I have moved the seat back, the knee pain is gone. I
am very thankful to say the least. I feel pretty laid out on the bike, but
I feel more comfortable with the angle of my legs when the seat is back a
bit more.

Curt

"Erik Freitag" <erik.freitag@pobox.com> wrote in message
newsan.2004.05.10.02.06.48.569740@pobox.com...
> On Mon, 10 May 2004 02:36:08 +0000, curt wrote:
>
> > Is there a negative in getting a new seat post that has the capability

of
> > moving back further?

>
> I don't know if there's a negative to a new seatpost, but I was wondering
> if what you really need is a longer stem.
>



  Reply With Quote
Old 10-05.-2004, 11:56 AM   #5
curt
Guest
 
Posts: n/a
Default Re: Technical seat position question

This is possible. I am a little above my original set up, which I took from
a book, but maybe I just like a higher seat. I may give that a try first.
I don't know how much higher I can go. I'll have to see how long my seat
post is I guess.

Thanks,
Curt

"R15757" <r15757@aol.com> wrote in message
news:20040509220942.04086.00001210@mb-m12.aol.com...
> Curt asked in part:
>
> << Is there a negative in getting a new seat post that has the capability

of
> moving back further? >>
>
> Curt, it is possible that your seat is still a bit too low. If this is

true,
> you could raise it up to the proper level and suddenly lose the impulse to

move
> back.
>
> Robert
>



  Reply With Quote
Old 10-05.-2004, 12:35 PM   #6
R15757
Guest
 
Posts: n/a
Default Re: Technical seat position question

<< This is possible. I am a little above my original set up, which I took from
a book, but maybe I just like a higher seat. I may give that a try first.
I don't know how much higher I can go. I'll have to see how long my seat
post is I guess. >>


Yeah I would push the seat up bit by bit until you find the point where it
finally feels too high, as long as it is not over the limit line, then lower it
a smidge (1 cm) from there. Generally you'll want the seat just below the point
where the hips rock with pedaling. Knee pain is often caused by too-low
saddles.

Robert
  Reply With Quote
Old 10-05.-2004, 01:09 PM   #7
curt
Guest
 
Posts: n/a
Default Re: Technical seat position question

Thanks Robert.

Curt

"R15757" <r15757@aol.com> wrote in message
news:20040509233508.00117.00001121@mb-m12.aol.com...
> << This is possible. I am a little above my original set up, which I took

from
> a book, but maybe I just like a higher seat. I may give that a try first.
> I don't know how much higher I can go. I'll have to see how long my seat
> post is I guess. >>
>
>
> Yeah I would push the seat up bit by bit until you find the point where it
> finally feels too high, as long as it is not over the limit line, then

lower it
> a smidge (1 cm) from there. Generally you'll want the seat just below the

point
> where the hips rock with pedaling. Knee pain is often caused by too-low
> saddles.
>
> Robert



  Reply With Quote
Old 11-05.-2004, 03:28 AM   #8
Alex Rodriguez
Guest
 
Posts: n/a
Default Re: Technical seat position question

In article <xbCnc.27702$L8.1240@nwrdny02.gnilink.net>, nospam@verizon.net
says...

>This is possible. I am a little above my original set up, which I took from
>a book, but maybe I just like a higher seat. I may give that a try first.
>I don't know how much higher I can go. I'll have to see how long my seat
>post is I guess.


If you do go up, do it a little at a time. You don't want to go to high
and possible cause an injury.
-------------
Alex

  Reply With Quote
Old 11-05.-2004, 06:49 AM   #9
curt
Guest
 
Posts: n/a
Default Re: Technical seat position question


"Alex Rodriguez" <adr5@columbia.edu> wrote in message
news:c7ohkm$css$8@newsmaster.cc.columbia.edu...
> In article <xbCnc.27702$L8.1240@nwrdny02.gnilink.net>, nospam@verizon.net
> says...
>
> >This is possible. I am a little above my original set up, which I took

from
> >a book, but maybe I just like a higher seat. I may give that a try

first.
> >I don't know how much higher I can go. I'll have to see how long my seat
> >post is I guess.

>
> If you do go up, do it a little at a time. You don't want to go to high
> and possible cause an injury.
> -------------
> Alex



Yeah, me moving my seat up or back a bit will have to wait. I just bought a
new seatpost on ebay though. I hope it is here by Friday. I am maxed out
on my current seatpost.

Thanks for the advise. I think I am very close to where I should be, but
was a bit above the limit line.

Curt


  Reply With Quote



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT +10. The time now is 09:29 AM.


Powered by: vBulletin Copyright © 2000 - 2008, Jelsoft Enterprises Ltd.
Copyright © 2001 - 2006 cyclingforums.com