Fixie chainlines. HELP

Bio27x

Hey kiddies.

I just converted my SS over to fixed. In the process I had to replace the majority of my drivetrain; partly to upgrade to 1/8", partly to get a decent chainline (not that it sucked on my SS, but my fixie hub jacked everything).

Now, when I spin there's a clicking that seems to be coming from the rear hub. Moreso, it seems to be coming from each individual chain link as it engages on the rear cog. My chainline isn't --perfect--, but it's not so bad that I would antcipate it causing such a problem.

Does anyone have any sugguestions? Is my chain too tight? I'm trying to avoid respacing & dishing my rear wheel, as I'm running a flip/flop hub, and desire to keep everything as centered as possible. I'm no mech, but I've got enough experience to know what I'm doing most o' the time. This is just my first fixed project. Help.

ciao.
jmp.

hippy

Did you put a new chain on an old cog perhaps?

If any part was worn before the swap, you'll have to swap out the chain AND
cog. If it was really badly worn, you might need to swap the chainring too.

You should have perfect chainline on a fixie.. throwing a chain on a fixie
results in much more drastic consequences than throwing one on a freewheel
bike - think about what will happen - lockup! = possible big ouch.

Check that it's not your hub either - remove the chain, spin the wheel and listen.

hth
hippy