![]() |
View
New Forum Topics Today's Forum Topics Set as homepage |
|
|||||||
| |
||||
Welcome to CyclingForums.com You are currently viewing our website as a guest which gives you limited access to view most discussions. You will have to register before you can post to this thread. By joining our free online community you will have access to post new topics, communicate privately with other cyclingforums.com members (PM), respond to polls, upload photos and access other special features like product reviews and classifieds. |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 |
|
Guest
Posts: n/a
|
First, I'm over 60 with both hips replaced within the last 2 years and still walk with a cane when away from the house. I try to get a least a four mile walk in each day but can do five but really relieved to sit down. I have a stationary bike but really want to start riding a real bike solely for the therapy. This is to excerise my legs and hips in a different way. Just got laid off from a mortgage company and on unemployment so I have limited funds to spend. I have a 15 speed junker bike (given to me) that I want to try to use. It functions ok and I was given a new seat (non racing...just comfy for a old ass) and mirror. The gears say Shimano Deore XT and the front forks say Manitou Easton E9. The frame itself is probably stolen as it has the name scratched out all over so there's no way to know what it is (it doesn't really matter anyway). Thru Amazon, I have ordered an underseat storage bag, Schwinn speedo/odometer, and a Bell CarGo Rear Rack because I want to add baskets in the future and need this to mount them on. I've gone thru some of the posts looking for advise on toolkits etc and found the group informative. QUESTION: I need new tires but since I haven't ridden a bike in over 40 years, I'm really not up to speed on how to figure out how to shop for them. The existing front tire rim is 26" X 1" (outside diameter) current tire says 26 x 1.50 rear tire rim is 26" x 1.25" (out side diameter) current tire says 26 X 1.75 The front tire has many bulges along the sides (looks like a racing tire...it's mostly smooth) and seems about to blow. The rear tire is an old mountain tire and worn out. I want the same size tire on each rim. Can I put a 26 X 1.75 tire on the front? Seems like I could because it's not much bigger that what I already have. Should I also buy new tubes? I've been to Amazon and priced tires. I don't need the off road...just street tires and Cheng Shen seem like the cheapest ones there at $6 to $9. Any advise appreciated. Just remember, I'm on a LIMITED budget and this is really an experiment to see if this a good idea for artificial hips. Met someone yesterday on a bike and turns out he had his knee AND hip replaced on one side and highly recommends biking as therapy. thanks twitchell photos less new seat and mirror: http://imgplace.com/image/view/3a22...22ad2b397b90ca1 http://imgplace.com/image/view/e129...76f5939acaeee7d http://imgplace.com/image/view/7fc7...c13f50414d2343d http://imgplace.com/image/view/da98...3555f224e3e4fc8 http://imgplace.com/image/view/9c17...e5b1472e2601101 http://imgplace.com/image/view/9ca2...b542aad704168b5 |
|
|
|
#2 | |
|
Registered User
Join Date: Sep 2003
Location: Suburban Chicago
Posts: 2,778
|
Quote:
1.75" tires will fit. new tubes is a good idea, to match up with the tire size and to have on hand when you get a flat.... so is a patch kit, pump, tire removal tools, etc. Bicycle riding will help with therapy and conditioning. I encourage you to give it a go; which sounds like you are already planning. Different tires have significantly different ride qualities and life. |
|
|
|
|
|
|
#3 |
|
Guest
Posts: n/a
|
In article <g2178k02l36@drn.newsguy.com>,
Twitchell <Twitchell_member@newsguy.com> wrote: > First, I'm over 60 with both hips replaced within the last 2 years and still > walk with a cane when away from the house. > Just got laid off from a mortgage company and on unemployment so I have > limited funds to spend. > > I have a 15 speed junker bike (given to me) that I want to try to use. Surprisingly, this is not a junky bike at all. More on that in a moment. It is also not a 15-speed. > and mirror. The gears say Shimano Deore XT and the front forks say Manitou > Easton E9. The frame itself is probably stolen as it has the name scratched > out all over so there's no way to know what it is (it doesn't really matter > anyway). XT is top-grade mountain bike equipment. Looking at the photo below, the paint job on that frame looks quite distinctive. > QUESTION: > > I need new tires but since I haven't ridden a bike in over 40 years, I'm > really > not up to speed on how to figure out how to shop for them. > I want the same size tire on each rim. Can I put a 26 X 1.75 tire on the > front? > Seems like I could because it's not much bigger that what I already have. > Should I also buy new tubes? I've been to Amazon and priced tires. I don't > need the off road...just street tires and Cheng Shen seem like the cheapest > ones > there at $6 to $9. > > Any advise appreciated. Just remember, I'm on a LIMITED budget and this is > really an experiment to see if this a good idea for artificial hips. Get street (slick) tires, because they will feel MUCH nicer when you are riding around on the road. Cheng Shin tires will be fine for now. Looking at the photos below, I bet your bike shifts pretty funny. The reason I say that is it appears to be a bike with 7- or 8-speed shifters and a 6-speed rear wheel (and a rusty chain). It's common to refer to a high-end bicycle's drivetrain by counting the rear cogs only, so what I'm saying is this is an 18-speed bike that should be a 21- or 24-speed. Because of that mismatch, I suspect the shifting is messed up. The best solution would be the correct set of cogs on the rear wheel, and a replaced chain, but that might be out of your budget (especially since it might mean a new rear wheel; I don't think that one is the original). The next-best solution might be to replace the shifter temporarily, and you'll probably still want to replace the chain, too. I don't want to scare you off: if you have to, you can probably just ride it, but the shifting will likely be off, with some skipping and rough running. > thanks > > twitchell > > photos less new seat and mirror: > > http://imgplace.com/image/view/3a22...22ad2b397b90ca1 > > http://imgplace.com/image/view/e129...76f5939acaeee7d > > http://imgplace.com/image/view/7fc7...c13f50414d2343d > > http://imgplace.com/image/view/da98...3555f224e3e4fc8 > > http://imgplace.com/image/view/9c17...e5b1472e2601101 > > http://imgplace.com/image/view/9ca2...b542aad704168b5 -- Ryan Cousineau rcousine@gmail.com http://www.wiredcola.com/ "In other newsgroups, they killfile trolls." "In rec.bicycles.racing, we coach them." |
|
|
|
#4 |
|
Guest
Posts: n/a
|
"Twitchell" <Twitchell_member@newsguy.com> wrote in message
news:g2178k02l36@drn.newsguy.com... > > First, I'm over 60 with both hips replaced within the last 2 years and > still > walk with a cane when away from the house. I try to get a least a four > mile > walk in each day but can do five but really relieved to sit down. > > Just got laid off from a mortgage company and on unemployment so I have > limited > funds to spend. > > I have a 15 speed junker bike (given to me) that I want to try to use. It > functions ok and I was given a new seat (non racing...just comfy for a old > ass) > and mirror. The gears say Shimano Deore XT and the front forks say > Manitou > Easton E9. The frame itself is probably stolen as it has the name > scratched out > all over so there's no way to know what it is (it doesn't really matter > anyway). OK, that ain't a junker. What's more, the equipment on it isn't half bad. I assume you intend to ride it on the street. a) Replace the saddle as you say you have. b) I suggest you have the bike "tuned" by a good local bike shop who can inspect it for any non-obvious problems such as a bad bottom bracket and the like. c) Replace the tires with new tires and tubes such as http://www.nashbar.com/profile.cfm?...0to%2026x1%2E75 (when you have the bike tuned the shop might have some applicable tires as well.) Don't worry about how tired you get at first. Believe it or not, it takes between two and three years to fully grow in blood vessels into your legs so that you aren't tired from moderate rides. Though my ex-wife only took 3 months or so. After you've been riding enough to believe you're no threat to anyone else on the road find a local club that has rides that you can go on. Be extremely conservative about rides. Your fastest pace might be half of someone else's easy pace. When I first started in my early 50's I couldn't keep up with people in their 70's who had been riding for years. Welcome to the club. |
|
|
|
#5 |
|
Guest
Posts: n/a
|
In article <rcousine-D69F0F.19204802062008@[74.223.185.199.nw.nuvox.net]>, Ryan
Cousineau says... > >In article <g2178k02l36@drn.newsguy.com>, > Twitchell <Twitchell_member@newsguy.com> wrote: > >> First, I'm over 60 with both hips replaced within the last 2 years and still >> walk with a cane when away from the house. > >> Just got laid off from a mortgage company and on unemployment so I have >> limited funds to spend. >> >> I have a 15 speed junker bike (given to me) that I want to try to use. > >Surprisingly, this is not a junky bike at all. More on that in a moment. >It is also not a 15-speed. > >> and mirror. The gears say Shimano Deore XT and the front forks say Manitou >> Easton E9. The frame itself is probably stolen as it has the name scratched >> out all over so there's no way to know what it is (it doesn't really matter >> anyway). > >XT is top-grade mountain bike equipment. Looking at the photo below, the >paint job on that frame looks quite distinctive. > >> QUESTION: >> >> I need new tires but since I haven't ridden a bike in over 40 years, I'm >> really >> not up to speed on how to figure out how to shop for them. > >> I want the same size tire on each rim. Can I put a 26 X 1.75 tire on the >> front? >> Seems like I could because it's not much bigger that what I already have. >> Should I also buy new tubes? I've been to Amazon and priced tires. I don't >> need the off road...just street tires and Cheng Shen seem like the cheapest >> ones >> there at $6 to $9. >> >> Any advise appreciated. Just remember, I'm on a LIMITED budget and this is >> really an experiment to see if this a good idea for artificial hips. > >Get street (slick) tires, because they will feel MUCH nicer when you are >riding around on the road. Cheng Shin tires will be fine for now. > >Looking at the photos below, I bet your bike shifts pretty funny. The >reason I say that is it appears to be a bike with 7- or 8-speed shifters >and a 6-speed rear wheel (and a rusty chain). It's common to refer to a >high-end bicycle's drivetrain by counting the rear cogs only, so what >I'm saying is this is an 18-speed bike that should be a 21- or 24-speed. > >Because of that mismatch, I suspect the shifting is messed up. The best >solution would be the correct set of cogs on the rear wheel, and a >replaced chain, but that might be out of your budget (especially since >it might mean a new rear wheel; I don't think that one is the original). I found a 26 inch rim (it was actually hanging in a tree behind a bike shop) with worn-out tire and a 7 cog gear. Thinking it was worthless I was going to toss it out but maybe I should keep it? > >The next-best solution might be to replace the shifter temporarily, and >you'll probably still want to replace the chain, too. > >I don't want to scare you off: if you have to, you can probably just >ride it, but the shifting will likely be off, with some skipping and >rough running. > >> thanks >> >> twitchell >> >> photos less new seat and mirror: >> >> http://imgplace.com/image/view/3a22...22ad2b397b90ca1 >> >> http://imgplace.com/image/view/e129...76f5939acaeee7d >> >> http://imgplace.com/image/view/7fc7...c13f50414d2343d >> >> http://imgplace.com/image/view/da98...3555f224e3e4fc8 >> >> http://imgplace.com/image/view/9c17...e5b1472e2601101 >> >> http://imgplace.com/image/view/9ca2...b542aad704168b5 > |
|
|
|
#6 |
|
Guest
Posts: n/a
|
On Jun 2, 11:31*am, Twitchell <Twitchell_mem...@newsguy.com> wrote:
> First, I'm over 60 with both hips replaced within the last 2 years and still > walk with a cane when away from the house. *I try to get a least a four mile > walk in each day but can do five but really relieved to sit down. > > I have a stationary bike but really want to start riding a real bike solely for > the therapy. *This is to excerise my legs and hips in a different way. > > Just got laid off from a mortgage company and on unemployment so I have limited > funds to spend. > > I have a 15 speed junker bike (given to me) that I want to try to use. *It > functions ok and I was given a new seat (non racing...just comfy for a oldass) > and mirror. *The gears say Shimano Deore XT and the front forks say Manitou > Easton E9. *The frame itself is probably stolen as it has the name scratched out > all over so there's no way to know what it is (it doesn't really matter anyway). It does matter. It's a good fifteen years old at least, but at one time, that was a very expensive bike, a top shelf bike shop bike, and the person who had it stolen probably was sick for quite some time. It makes me sad to think that you see a junker, and I see very high quality details such as the rear dropouts. As there's probably no way to get it back to the original owner, do treat it with a bit of respect--those parts will shine up well. Rusty bits such as bottle cage bolts are cheap to replace. Put a new wheel in rear with the appropriate cassette and tire. New chain if needed, brake shoes, etc. |
|
|
|
#7 |
|
Guest
Posts: n/a
|
In article <g22cbf0khb@drn.newsguy.com>,
Twitchell <Twitchell_member@newsguy.com> wrote: > In article <rcousine-D69F0F.19204802062008@[74.223.185.199.nw.nuvox.net]>, > Ryan > Cousineau says... > > > >In article <g2178k02l36@drn.newsguy.com>, > > Twitchell <Twitchell_member@newsguy.com> wrote: > > > >> First, I'm over 60 with both hips replaced within the last 2 years and > >> still > >> walk with a cane when away from the house. > > > >> Just got laid off from a mortgage company and on unemployment so I have > >> limited funds to spend. > >> > >> I have a 15 speed junker bike (given to me) that I want to try to use. > > > >Surprisingly, this is not a junky bike at all. More on that in a moment. > >It is also not a 15-speed. > >Looking at the photos below, I bet your bike shifts pretty funny. The > >reason I say that is it appears to be a bike with 7- or 8-speed shifters > >and a 6-speed rear wheel (and a rusty chain). It's common to refer to a > >high-end bicycle's drivetrain by counting the rear cogs only, so what > >I'm saying is this is an 18-speed bike that should be a 21- or 24-speed. > > > >Because of that mismatch, I suspect the shifting is messed up. The best > >solution would be the correct set of cogs on the rear wheel, and a > >replaced chain, but that might be out of your budget (especially since > >it might mean a new rear wheel; I don't think that one is the original). > > I found a 26 inch rim (it was actually hanging in a tree behind a bike shop) > with worn-out tire and a 7 cog gear. Thinking it was worthless I was going > to > toss it out but maybe I should keep it? Yes. Well, maybe. You need to show someone who will know (probably your local bike shop) the bike, and ask them how many speeds the shifter is designed to shift. You can check this yourself by just counting how many times the cable clicks out as you shift from low to high gear, keeping in mind that you get one fewer clicks than you have gears. As for your found wheel, it may well be trouble in some other ways, but the same bike shop can tell you if it is the right one to go with your shifter. Just so you know, brand new (entry-level but good) parts would cost like so: rear wheel: $50, maybe less if you're lucky, maybe more if you're not. 8-speed cassette (cogs): $20 or so, less for 7-speed. new chain: $20, more or less. If your budget would run to $100 for this project, I'd recommend all three and you'd be good to go. -- Ryan Cousineau rcousine@gmail.com http://www.wiredcola.com/ "In other newsgroups, they killfile trolls." "In rec.bicycles.racing, we coach them." |
|
|
|
#8 |
|
Guest
Posts: n/a
|
On 2 Jun 2008 09:31:16 -0700, Twitchell wrote:
> First, I'm over 60 with both hips replaced within the last 2 years and TOTM |
|
|
|
#9 |
|
Guest
Posts: n/a
|
"Ryan Cousineau" <rcousine@gmail.com> a écrit:
> XT is top-grade mountain bike equipment. Looking at the > photo below, the paint job on that frame looks quite distinctive. It's a Marin, circa 1992-3, I think the Pine Mountain model. The round-round-round seatstays, coloured stem, distinctive dropouts, and that paint job mark it out. James Thomson |
|
|
|
#10 |
|
Guest
Posts: n/a
|
"Ryan Cousineau" <rcousine@gmail.com> a écrit:
> You need to show someone who will know (probably your > local bike shop) the bike, and ask them how many speeds > the shifter is designed to shift. Those are 7-speed. James Thomson |
|
|
|
#11 |
|
Guest
Posts: n/a
|
My experience with a few LBS and an older bike (similar vintage) is
that some are more interested (and have a better supply of old parts) than others. You may need to shop around to find a place that cares enough to help you. |
|
|
|
#12 |
|
Guest
Posts: n/a
|
In article <4844ff87$0$900$ba4acef3@news.orange.fr>, James Thomson says...
> >"Ryan Cousineau" <rcousine@gmail.com> a écrit: > >> XT is top-grade mountain bike equipment. Looking at the >> photo below, the paint job on that frame looks quite distinctive. > >It's a Marin, circa 1992-3, I think the Pine Mountain model. The >round-round-round seatstays, coloured stem, distinctive dropouts, and that >paint job mark it out. > >James Thomson > > I live in Marin county CA....maybe that explains it. twitch |
|
|
|
#13 |
|
Guest
Posts: n/a
|
In article <ri6kuvmfwokp.1ssl9e5a4ecr0$.dlg@40tude.net>, agcou says...
> >On 2 Jun 2008 09:31:16 -0700, Twitchell wrote: > >> First, I'm over 60 with both hips replaced within the last 2 years and > >TOTM Acronym Definition TOTM Tailored Operational Training Meal TOTM Think of the Money TOTM Time of the Month TotM Tomb of the Mutilated (band Cannibal Corpse album and message board) TOTM top o' the mornin' TOTM Transportation Operations and Traffic Management TOTM Truck of the Month .....so...skip the acronym and just say it. There'd be lesss confusion. twitch |
|
|
|
#14 |
|
Guest
Posts: n/a
|
Twitchell wrote:
> First, I'm over 60 with both hips replaced within the last 2 years and still > walk with a cane when away from the house. I try to get a least a four mile > walk in each day but can do five but really relieved to sit down. > > Any advise appreciated. Just remember, I'm on a LIMITED budget and this is > really an experiment to see if this a good idea for artificial hips. Met > someone yesterday on a bike and turns out he had his knee AND hip replaced on > one side and highly recommends biking as therapy. I know several guys over 60 who have had hips and knees replaced, they all ride 1,000's of miles a year. A couple of them (single & double hipsters) are ultra-cyclists, doing single event rides of up to 750 (mountainous) miles. |
|
|
|
#15 |
|
Guest
Posts: n/a
|
>> It's a Marin, circa 1992-3, I think the Pine Mountain model. The
>> round-round-round seatstays, coloured stem, distinctive dropouts, >> and that paint job mark it out. It's a '93 Marin Pine Mountain - I found a copy of the '93 Marin catalogue on my hard drive. If you'd like a copy (It's a 2.5MB .pdf in German, but the pictures are nice) just send me an email. My reply-to address is valid. Here's a '92 Marin catalogue. Many of the features are the same as '93, but the paint is different: http://www.retrobike.co.uk/forum/viewtopic.php?t=12451 James Thomson |
|