Are there any 1" threaded headsets that fit 1 1/8" headtube?

Since 2001, over 90,000 cyclist's have joined Cycling Forums to discuss topics from general cycling to equipment, training, racing and travel or vacation destinations (especially in europe during the tour de france). We also feature an great deals in our online store, 100's of articles, classifieds and product reviews.

Hi,
Not sure if I am asking this correctly, but does anyone make a headset that
fits into a 1 1/8" head tube that allows the use of a 1" threaded fork?

Thanks!
Lyle

res09c5t wrote:
> Hi,
> Not sure if I am asking this correctly, but does anyone make a headset that
> fits into a 1 1/8" head tube that allows the use of a 1" threaded fork?

See: http://harriscyclery.net/site/page.cfm?PageID=49&Category=1321

Sheldon "Devolution" Brown
+-----------------------------------------------+
| I’m appearing as Preposteros in |
| Gilbert & Sullivan's Thespis at M.I.T. |
| April 9-10,15-17 http://web.mit.edu/gsp/www |
| http://sheldonbrown.com/music.html |
| Photos: http://sheldonbrown.org/g-s/thespis |
+-----------------------------------------------+
Harris Cyclery, West Newton, Massachusetts
Phone 617-244-9772 FAX 617-244-1041
http://harriscyclery.com
Hard-to-find parts shipped Worldwide
http://captainbike.com http://sheldonbrown.com

Hi,
So these press into the head tube and then the headset presses into them?
Do they add much to the stack height?
Thanks!
Lyle

"Sheldon Brown" <captbike@sheldonbrown.com> wrote in message
news:40801AD6.4060304@sheldonbrown.com...
> res09c5t wrote:
> > Hi,
> > Not sure if I am asking this correctly, but does anyone make a headset
that
> > fits into a 1 1/8" head tube that allows the use of a 1" threaded fork?
>
> See: http://harriscyclery.net/site/page.cfm?PageID=49&Category=1321
>
> Sheldon "Devolution" Brown
> +-----------------------------------------------+
> | I’m appearing as Preposteros in |
> | Gilbert & Sullivan's Thespis at M.I.T. |
> | April 9-10,15-17 http://web.mit.edu/gsp/www |
> | http://sheldonbrown.com/music.html |
> | Photos: http://sheldonbrown.org/g-s/thespis |
> +-----------------------------------------------+
> Harris Cyclery, West Newton, Massachusetts
> Phone 617-244-9772 FAX 617-244-1041
> http://harriscyclery.com
> Hard-to-find parts shipped Worldwide
> http://captainbike.com http://sheldonbrown.com
>

res09c5t wrote:
> Not sure if I am asking this correctly, but does anyone make a headset that
> fits into a 1 1/8" head tube that allows the use of a 1" threaded fork?

There are sleeves to mount one inch format forks and
headsets (30.2mm) in 1-1/8 frames.

There are sleeves to mount an O/S format Ahead stem on a one
inch format fork.

There are also sleeves to adapt one inch format (22.2mm)
quill stems in O/S ( 25.4) forks.

And then again you can buy a headset that's thick enough to
accomodate a one inch format fork in an OverSize frame from
Chris King. That way you avoid a separate adapter but you
end up paying more and it looks and works the same.
--
Andrew Muzi
www.yellowjersey.org
Open every day since 1 April, 1971