fh-7800 hub dimensions

Since 2001, over 90,000 cyclist's have joined Cycling Forums to discuss topics from general cycling to equipment, training, racing and travel or vacation destinations (especially in europe during the tour de france). We also feature an great deals in our online store, 100's of articles, classifieds and product reviews.

I want to built up one of these hubs and would like the dimensions to enter
into a spoke calculator. I use the spocalc.exe.
I need center to each flange distance and flange diameter.
Thanks
Eric

--
Eric
nospamgottesmane@optonline.net
remove the "nospam" from the address to reply!!

"Eric" <nospamgottemane@optline.net> wrote in message news:<eZjcc.15532$7r2.2165488@news4.srv.hcvlny.cv.net>...
> I want to built up one of these hubs and would like the dimensions to enter
> into a spoke calculator. I use the spocalc.exe.
> I need center to each flange distance and flange diameter.
> Thanks
> Eric

Hi, the specs are on this website:
http://www.dura-ace.com/publish/content/duraace/en/home/the_product0/wheels.html

Life is Good!
Jeff

<< Hi, the specs are on this website:
http://www.dura-ace.com/publish/content/duraace/en/home/the_product0/wheel
s.html
>><BR><BR>

Doesn't gibe flange diameter or center to flange...tho-I think the same as 7700
hubs tho-

REMEMBER-10s cogsets only!!

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"

Jeff Starr wrote:
> "Eric" <nospamgottemane@optline.net> wrote in message
> news:<eZjcc.15532$7r2.2165488@news4.srv.hcvlny.cv.net>...
> > I want to built up one of these hubs and would like the dimensions to
> > enter into a spoke calculator. I use the spocalc.exe. I need center to
> > each flange distance and flange diameter. Thanks Eric
> Hi, the specs are on this website: http://www.dura-/http://www.dura- ace.com/publish/content/duraace/en/home/the_product0/w-
> heels.html
> Life is Good! Jeff



Life may be good, but the URL you gave isn't. Hole PCD 44mm Flange
Distance 56.9 Dish 7.9 From: http://tinyurl.com/yqzem or if you can cut
and paste the original too long URL: http://www.dura-
ace.com/publish/content/duraace/en/home/the_
product0/wheels.ExtraMainContentPar.0007.File.tmp/FH7800_spe
c.pdf I agree with Peter Chisholm. The flanges are larger, spacing
slightly different, spoke hole diameter is identical. When I look at
the current version that Sheldon Brown carries on his web site I see
the FH-7800 hub with correct dimensions listed. If you saved an older
version you should revisit the site and get the new chart.



--

vecchio51@aol.com (Qui si parla Campagnolo ) wrote in message news:<20040406093157.17770.00000585@mb-m21.aol.com>...
> << Hi, the specs are on this website:
> http://www.dura-ace.com/publish/content/duraace/en/home/the_product0/wheel
> s.html
> >><BR><BR>
>
> Doesn't gibe flange diameter or center to flange...tho-I think the same as 7700
> hubs tho-
>
> REMEMBER-10s cogsets only!!
>
> Peter Chisholm
> Vecchio's Bicicletteria
> 1833 Pearl St.
> Boulder, CO, 80302
> (303)440-3535
> http://www.vecchios.com
> "Ruote convenzionali costruite eccezionalmente bene"

Peter, did you try clicking on pdf files at bottom of page, where it
has the links - FH-7800 Specifications and HB-7800 Specifications?
The info might be in there.
I ordered the back hub [DA FH-7700] for the wheels I am going to have
built. It looks like June, for enough funds to have you do the work.
I'll be in touch.

Life is Good!
Jeff

vecchio51@aol.com (Qui si parla Campagnolo ) wrote in message news:<20040406093157.17770.00000585@mb-m21.aol.com>...
> << Hi, the specs are on this website:
> http://www.dura-ace.com/publish/content/duraace/en/home/the_product0/wheel
> s.html
> >><BR><BR>
>
> Doesn't gibe flange diameter or center to flange...tho-I think the same as 7700
> hubs tho-
>
> REMEMBER-10s cogsets only!!
>

http://www.dura-ace.com/publish/content/duraace/en/home/the_product0/wheels.ExtraMainContentPar.0007.File.tmp/FH7800_spec.pdf

shows that flange diameter is 44mm. Distance to right flange is 49mm.
Distance to left flange is 64.8mm.

I'd be willing to bet that these figures are within a couple tenths of
a millimeter of the FH-7700 hub.

Jeff